仔细分析了一下这个程序(虽不能完全看懂……），这似乎，好像，的确绘出的是一张静态图。按理说不会有什么变化的呀！

忆楠：你到底是怎么看到变化的？仔细说一说吧。（不过你是不是有必要好好休息一下，盯着屏幕时间太久了吧）

缺乏动感。。

没有什么变化。

我加了一些注释，还没有看完，有点难，还要懂汇编和微机原理

希望有人合作把这个程序注释完。这个程序真的还很好的。

#include <stdio.h> #include <dos.h> #include <math.h> long Addr[768]; int Mode; /* REGS的定义(在dos.h中)： 　　　struct WORDREGS{unsigned int ax, bx, cx, dx, si, di, cflag, flags;} 　　　struct BYTEREGS{unsigned char al, ah, bl, bh, cl, ch, dl, dh;} 　　　union REGS{struct WORDREGS x;struct BYTEREGS h;} 头文件：dos.h */

Set_Mode (int mode) { union REGS r; /*REGS在哪定义的？原形是怎么样的？？*/ r.h.ah=0; r.h.al=mode; int86 (0x10,&r,&r); /*这个函数的功能？是通用8086软中断接口*/ }

/*功能 入口参数 出口参数 INT 10H 的 00H功能 设置显示模式 AH = 00H 　 AL = 模式(如果位 7 置位，则不清除显示缓冲区) */

Set_Graphics_Mode (unsigned x,unsigned y) { long i; if ((x<321)&&(y<201)) { Set_Mode (0x13); Mode=0x13; for (i=0;i<200;i++) Addr[i]=320*i; } else if ((x<641)&&(y<401)) { Set_Mode (0x5c); Mode=0x5c; for (i=0;i<400;i++) Addr[i]=640*i; } else if ((x<641)&&(y<481)) { Set_Mode (0x5d); Mode=0x5d; for (i=0;i<480;i++) Addr[i]=640*i; } else if ((x<641)&&(y<481)) { Set_Mode (0x5d); Mode=0x5d; for (i=0;i<480;i++) Addr[i]=640*i; } else if ((x<801)&&(y<601)) { Set_Mode (0x5e); Mode=0x5e; for (i=0;i<600;i++) Addr[i]=800*i; } else if ((x<1025)&&(y<769)) { Set_Mode (0x62); Mode=0x62; for (i=0;i<768;i++) Addr[i]=1024*i; } else { Set_Mode (3); printf ("Not support this mode .\n"); getch (); } }/*显示模式设置完成*/

/* 函数名: int86x 功 能: 通用8086软中断接口 用 法: int int86x(int intr_num, union REGS *insegs, union REGS *outregs, struct SREGS *segregs); SREGS 的定义： struct SREGS {unsigned int es,cs,ss,ds} 　　 */ set_pattern () { int i; unsigned char pat[256][3]; struct SREGS inreg; union REGS reg;

pat[0][0]=0;pat[0][1]=0;pat[0][2]=0; for (i=1;i<=255;i++) { pat[i][0]=(unsigned char)((float)(abs(i-127)*63)/127.0+0.5); pat[i][1]=(unsigned char)((float)(abs(i-127)*63)/127.0+0.5); pat[i][2]=63; } reg.x.ax=0x1012; reg.x.bx=0; reg.x.cx=256; reg.x.dx=FP_OFF(pat); inreg.es=FP_SEG(pat); int86x (0x10,&reg,&reg,&inreg); }

plot (int x,int y,unsigned char color) { long offset; char Page; unsigned char far *address; switch (Mode) { case 0x13: offset=Addr[y]+x; address=(unsigned char far *)(0xa0000000L+offset); *address=color; break; case 0x5c: case 0x5d: case 0x5e: offset=Addr[y]+x; Page=(offset>>16); outportb (0x3c4,0xe); outportb (0x3c5,Page^0x02); offset=offset&65535; address=(unsigned char far *)(0xa0000000L+offset); *address=color; break; case 0x62: offset=Addr[y]+x; Page=y>>6; outportb (0x3c4,0xe); outportb (0x3c5,Page^0x02); offset=offset&65535; address=(unsigned char far *)(0xa0000000L+offset); *address=color; break; default: break; } }

get_pixel (int x,int y) { long offset; char Page; unsigned char far *address; unsigned char color; switch (Mode) { case 0x13: offset=Addr[y]+x; address=(unsigned char far *)(0xa0000000+offset); color=*address; break; case 0x5c: case 0x5d: case 0x5e: offset=Addr[y]+x; Page=(offset>>16); outportb (0x3c4,0xe); outportb (0x3c5,Page^0x02); offset=offset&65535; address=(unsigned char far *)(0xa0000000L+offset); color=*address; break; case 0x62: offset=Addr[y]+x; Page=y>>6; outportb (0x3c4,0xe); outportb (0x3c5,Page^0x02); offset=offset&65535; address=(unsigned char far *)(0xa0000000L+offset); color=*address; break; default: break; } return (color); }

randint (unsigned int range) { float sigma=423.1966; static double OldRand=0.4231967; double temp; temp=sigma*OldRand; OldRand=temp-(int)temp; return (int)(OldRand*(float)range); }

void New_Col (int xa,int ya,int x,int y,int xb,int yb) { unsigned int color; color=abs(xa-xb)+abs(ya-yb); color=randint(color<<1)-color; color=color+(get_pixel(xa,ya)+get_pixel(xb,yb)+1)>>1; if (color<1) color=1; else if (color>255) color=255; if ((get_pixel(x,y)==0)) plot (x,y,color); }

void Sub_Divide (int x1,int y1,int x2,int y2) { int x,y; unsigned char color; if (!((x2-x1<2)&&(y2-y1<2))) { x=(x1+x2)>>1; y=(y1+y2)>>1; New_Col (x1,y1,x,y1,x2,y1); New_Col (x2,y1,x2,y,x2,y2); New_Col (x1,y2,x,y2,x2,y2); New_Col (x1,y1,x1,y,x1,y2); color=(get_pixel(x1,y1)+get_pixel(x2,y1)+get_pixel(x2,y2)+get_pixel (x1,y2)+2)>>2; plot (x,y,color); Sub_Divide (x1,y1,x,y); Sub_Divide (x,y1,x2,y); Sub_Divide (x,y,x2,y2); Sub_Divide (x1,y,x,y2); } }

main () { int x,y; x=320;y=200; Set_Graphics_Mode (x,y); set_pattern (); plot (0,0,randint(254)+1); plot (x-1,0,randint(254)+1); plot (x-1,y-1,randint(254)+1); plot (0,y-1,randint(254)+1); Sub_Divide (0,0,x-1,y-1); getch(); Set_Mode (0x03); }

还要懂汇编和微机原理？哦，我的天哟！！！××××××××××

看来我至少要等到大三才能看懂这个程序了。

啊

我拿回家去是试试啊