Private Sub Text3_KeyPress(KeyAscii As Integer)
aword = aword + 1
If KeyAscii = 8 Then Exit Sub
Select Case Chr(KeyAscii)
  Case "a" To "z", "A" To "Z", "0" To "9"
    Text3.SelStart = aword
  Case Else
    MsgBox ("密码只能为英文字母或者阿拉伯数字")
    Text3.Text = ""          ，《《-----------这句没效果
    Text3.SetFocus
End Select
End Sub

该怎么弄？请指教啊，在线等

是这样的！我想限制不能输入中文，如果是中文弹出提示，点确定后清空输入内容，要不然，虽然有提示，但是输入的中文还是或保留在TXET文本框中，因为是密码输入框所以。。。。。
如果有限制中文输入的代码，希望能发个来看看！！谢谢

没有其他的了我吧所有的代码发上来
Private Sub Command1_Click()
If Text1.Text = "" Then
    MsgBox "请您输入查询条件", 32, "系统"
     Exit Sub
Else
    = adCmdText
   Adodc1.RecordSource = "select * from [user] where  用户名 = '" & Trim(Text1.Text) & "'"
   Adodc1.Refresh
If Adodc1.Recordset.RecordCount > 0 Then
   Text2.Text = Adodc1.Recordset.Fields("用户名")
   Text3.Text = Adodc1.Recordset.Fields("密码")
   Combo1.Text = Adodc1.Recordset.Fields("权限")
   Text1.Text = ""
   Text2.Enabled = False
   Text3.Enabled = False
   Combo1.Enabled = False
   Command3.Enabled = True
Else
    MsgBox "没有您要查找的员工,请您确认后重新输入", 32, "系统"
   End If
   End If
End Sub

Private Sub Command2_Click()
Command3.Enabled = False
Text2.Enabled = True
Text3.Enabled = True
Text4.Enabled = True
Text4.Enabled = True
Combo1.Enabled = True
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text4.Text = ""
Text2.BackColor = &H80000005
Text3.BackColor = &H80000005
Text4.BackColor = &H80000005
Combo1.BackColor = &H80000005
Combo1.Text = "业务员"
End Sub
Private Sub Command3_Click()
Text2.Enabled = True
Text3.Enabled = True
Combo1.Enabled = True
Text2.BackColor = &H80000005
Text3.BackColor = &H80000005
Combo1.BackColor = &H80000005
End Sub

Private Sub Command4_Click()
    If Text2.Text = "" Then
     MsgBox "姓名不能为空！", 32, "系统"
     Exit Sub
    Else
    End If
   If Text3.Text = "" Then
   MsgBox "密码不能为空！", 32, "系统"
     Exit Sub
    Else
    End If
   If Text4.Text = "" Then
   MsgBox "请再次输入密码！", 32, "系统"
   Text4.SetFocus
     Exit Sub
    Else
    End If
   If Text4.Text <> Text3.Text Then
   MsgBox "两次密码输入不一致，请重新输入！", 32, "系统"
   Text4.Text = ""
   Text4.SetFocus
    Exit Sub
    Else
    End If
   If Combo1.Text = "业务员" Then
   GoTo zx
   Else
   End If
   If Combo1.Text = "管理员" Then
   GoTo zx
   Else
   MsgBox "权限只能为“业务员”或“管理员”！", 32, "系统"
   Exit Sub
   End If
zx:
    = adCmdText
    Adodc1.RecordSource = "select * from [user] where  用户名 = '" & Trim(Text2.Text) & "'"
    Adodc1.Refresh
   If Adodc1.Recordset.RecordCount > 0 Then
      myval = MsgBox("已有此人员记录！按确认键修改记录，否则请重新输入！", vbYesNo, "系统")
   If myval = vbYes Then
     Adodc1.Recordset.Fields("用户名") = Trim(Text2.Text)
     Adodc1.Recordset.Fields("密码") = Trim(Text3.Text)
     Adodc1.Recordset.Fields("权限") = Trim(Combo1.Text)
     Adodc1.Recordset.Update
     MsgBox "数据修改成功！", , "系统提示"
     Adodc1.Refresh
  Exit Sub
  End If
  Else
    Adodc1.Recordset.AddNew
    Adodc1.Recordset.Fields("用户名") = Trim(Text2.Text)
    Adodc1.Recordset.Fields("密码") = Trim(Text3.Text)
    Adodc1.Recordset.Fields("权限") = Trim(Combo1.Text)
    Adodc1.Recordset.Update
    Adodc1.Recordset.Close
    MsgBox "数据保存成功！", , "系统提示"
    Adodc1.Refresh
End If
Call Form_Load
End Sub

Private Sub Command5_Click()
Form3.Show
Unload Me
End Sub
Private Sub Command6_Click()
Call Form_Load
End Sub
Private Sub Command7_Click()
If Text2.Text = "" Then
  MsgBox "请查找是否有此记录！", , "系统提示"
  Exit Sub
  End If
If Text2.Text <> "" Then
    = adCmdText
   Adodc1.RecordSource = "select * from [user] where  用户名 = '" & Trim(Text2.Text) & "'and 权限 = '" & Trim(Combo1.Text) & "'"
   Adodc1.Refresh
 If Adodc1.Recordset.RecordCount > 0 Then
   myval = MsgBox("确定删除此用户吗？", vbYesNo, "系统")
  If myval = vbYes Then
   Adodc1.Recordset.Delete
   Adodc1.Refresh
   End If
    MsgBox "删除成功！", , "系统提示"
   Call Form_Load
   End If
   Else
   MsgBox "请查找是否有此记录！", , "系统提示"
   End If
End Sub
Private Sub Form_Load()
Command3.Enabled = False
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text4.Text = ""
Text2.Enabled = False
Text2.BackColor = &HFFFFC0
Text3.Enabled = False
Text3.BackColor = &HFFFFC0
Text4.Enabled = False
Combo1.Enabled = False
Combo1.BackColor = &HFFFFC0
Text4.BackColor = &H0&
Combo1.Text = ""
Combo1.AddItem "业务员"
Combo1.AddItem "管理员"
End Sub
Private Sub Text3_KeyPress(KeyAscii As Integer)
aword = aword + 1
If KeyAscii = 8 Then Exit Sub
Select Case Chr(KeyAscii)
  Case "a" To "z", "A" To "Z", "0" To "9"
    Text3.SelStart = aword
  Case Else
     MsgBox ("密码只能为英文字母或者阿拉伯数字")
Text3.Text = ""
Text3.SetFocus
End Select
End Sub
Private Sub Text4_KeyPress(KeyAscii As Integer)
aword = aword + 1
If KeyAscii = 8 Then Exit Sub
Select Case Chr(KeyAscii)
  Case "a" To "z", "A" To "Z", "0" To "9"
    Text4.SelStart = aword
  Case Else
     MsgBox ("密码只能为英文字母或者阿拉伯数字")
    Text4.Text = ""
    Text4.SetFocus
End Select
End Sub

我在点击添加以后，也就是
Private Sub Command2_Click()
中把
Text3.Enabled = False
改成了
Text3.Enabled = ture
就是说
Text3.Enabled 已经可以更改了


[ 本帖最后由 wxflw 于 2012-2-15 11:32 编辑 ]

添加按钮是初始化text等信息输入框的，没有写入数据库的功能，只有点击保存才能写入数据库
如果已经有登记过的用户名会弹出提示，已经存在该用户，如果确定保存只是修改该用户的信息，不会删除该用户，也不会
重复添加该用户。我考虑过这个问题过了，所以在保存按钮里有判断语句了的。