用VC6写了一只DLL～再用VB6中去载入～
奇怪的是有时正常有时不正常～
是不是除了VB6档头要声明外～
还要用什么API载入DLL的资源才行吗？

特别是用For循环连续运行DLL时～
几乎每次都失败～

不用循环连续运行就比较正常～
这是什么原因呢？

额外加问这比较不重要～我有后制处理有疑似解决～
明明有VC6的传回Bool值～但是VB6中确无法直接认出来～
还要另外写IIf判断式处理～这又为何？

用Debug.Print看到用VC6返回True～但是却不能直接等于VB6的True～
好奇怪～

VC:

bool _stdcall ST2AT(int,int,char*,char*,char*);                //功能函式:STDF转ATDF
bool _stdcall AT2ST(int,int,char*,char*,char*);                //功能函式:ATDF转STDF
bool _stdcall ST2MG(int,int,char*,char*,char*);                //功能函式:STDF档案合并
bool _stdcall AT2MG(int,int,char*,char*,char*);                //功能函式:ATDF档案合并
bool _stdcall ST2SP(int,int,char*,char*,char*);                //功能函式:STDF档案切割

VB:

Public Declare Function ST2MG Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByVal FileName As String, ByVal TmpFileNameStr As String, ByVal E_FileName As String) As Boolean
Public Declare Function ST2AT Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByVal FileName As String, ByVal TmpFileNameStr As String, ByVal E_FileName As String) As Boolean
Public Declare Function AT2ST Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByVal FileName As String, ByVal TmpFileNameStr As String, ByVal E_FileName As String) As Boolean
Public Declare Function AT2MG Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByVal FileName As String, ByVal TmpFileNameStr As String, ByVal E_FileName As String) As Boolean
Public Declare Function ST2SP Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByVal FileName As String, ByVal TmpFileNameStr As String, ByVal E_FileName As String) As Boolean

def映射档:

;FMain.def
LIBRARY FMain
EXPORTS
  ST2MG @1
  ST2AT @2
  AT2MG @3
  ST2SP @4

映射是少一个～但是那个目前没用到～VB里也没呼叫到～

少的那个是因为IEEE754标准协定的缘故～
除不尽的4Bytes(高低位元倒反)的小数转成ASCII码后～
就再也转不回原本的二进制了～
不信你可以试试～
会越转差距越大～
那是写到一半才发现的~~
所以我无法克服～
就没写了～

结论是～
跟上面每个人（包含我）怀疑的都无关的地方～
因为我是手动黏贴发行版的DLL档～
里面没有内含调试功能～所以无法进行调试～

发行版的DLL档～无法进行代码调试～

然后VB的声明函式返回值改为长整型～
VC的函式返回值改为1 or 0～
就一切OK了～

另外开了个MFC DLL的工程～
把原本的全部转过去～重新编译～
所以原本不能用的东西都能用了～
不用再额外加代码～

中间也碰到过C版某位同志贴的的问题～
再来VB要传控件句柄让VC控制VB的介面变换～
和玩玩多线程～

VC:

int _stdcall ST2AT(int,int,char&,char&,char&);                //功能函式:STDF转ATDF
int _stdcall AT2ST(int,int,char&,char&,char&);                //功能函式:ATDF转STDF
int _stdcall ST2MG(int,int,char&,char&,char&);                //功能函式:STDF档案合并
int _stdcall AT2MG(int,int,char&,char&,char&);                //功能函式:ATDF档案合并
int _stdcall ST2SP(int,int,char&,char&,char&);                //功能函式:STDF档案切割

VB:

Public Declare Function ST2MG Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByRef FileName As String, ByRef TmpFileNameStr As String, ByRef E_FileName As String) As Long
Public Declare Function ST2AT Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByRef FileName As String, ByRef TmpFileNameStr As String, ByRef E_FileName As String) As Long
Public Declare Function AT2ST Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByRef FileName As String, ByRef TmpFileNameStr As String, ByRef E_FileName As String) As Long
Public Declare Function AT2MG Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByRef FileName As String, ByRef TmpFileNameStr As String, ByRef E_FileName As String) As Long
Public Declare Function ST2SP Lib "FMain.dll" (ByVal opt As Integer, ByVal FCount As Integer, ByRef FileName As String, ByRef TmpFileNameStr As String, ByRef E_FileName As String) As Long