char *IMODEL;
char *TAG;
char *SER;
char *DCODE;
char *BBO;
char *tmp;
char *MODEL;
char *MBTOOL;
int resout;
struct palettetype palette;     /* Used to read palette info    */
int LEN;

int main()
{
 int MCODEYN=1;
 IMODEL="NOINPUT";
 MODEL="TTN";
 tmp="NOINPUT";
 TAG="1111111";
 SER="11111111-1111111";
 DCODE="111111111";
 BBO="11111111111";
 Initialize();    /* Set system into Graphics mode    */
 WelcomePM();
 CreatPM();
 Select();
 while (*IMODEL==*tmp)
   {
    StatusLine("--- Please input the MODEL !     EX. TTN-1534 ---",15);      /*底部信息提示函数，StatusLine("提示信息",颜色号)   */
    IMODEL=Input(10,200,12,"Please Input The Model:",12);                   /*屏幕输入函数，Input(x轴，y轴，颜色号，"提示信息"，输入的长度);  */
    resout=GetMODEL(IMODEL);

    if (*IMODEL==*tmp)
     {
     StatusLine("--- You have no input anything ! After press anykey to reinput ! ---",12);   
     getch();
      }
    else if (resout==0)
     {
     StatusLine("--- The input's Model is inconsistent with the choice Model ! Please choose! ---",12);
     IMODEL="NOINPUT";
     getch();
     QP();
     CreatPM();
     Select();
      }
    }
    strcpy(MODEL,IMODEL);
    printf("IMODEL=%s\n",IMODEL);
    printf("MODEL=%s\n",MODEL);
    strcpy(IMODEL,"NOINPUT");

   while (*IMODEL==*tmp)
    {
     StatusLine("--- Please input the TAG !     EX. C2002JS ---",15);
     IMODEL=Input(10,212,12,"Please Input The TAG:",7);
     if (*IMODEL==*tmp)
     {
     StatusLine("--- You have no input anything ! After press anykey to reinput ! ---",12);
     getch();
      }
     if (strlen(IMODEL)<7 && IMODEL!=*tmp)
      {
      StatusLine("--- The length of TAG is less than 7 ! After press anykey to reinput ! ---",12);
      IMODEL="NOINPUT";
      getch();
      setfillstyle(1,0);
      bar(10,210,222,224);
      }
     }

     strcpy(TAG,IMODEL);
     printf("\n");
     printf("MODEL=%s\n",MODEL);
     printf("IMODEL=%s\n",IMODEL);
     printf("TAG=%s\n",TAG);
     strcpy(IMODEL,"NOINPUT");
   while (*IMODEL==*tmp)
    {
     StatusLine("--- Please input the SER !     EX. 12345678-1234567 ---",15);
     IMODEL=Input(10,224,12,"Please Input The SER:",16);
     if (*IMODEL==*tmp)
     {
     StatusLine("--- You have no input anything ! After press anykey to reinput ! ---",12);
     getch();
      }
     else if (strlen(IMODEL)<16 && IMODEL!=*tmp)
      {
      StatusLine("--- The length of SER is less than 16 ! After press anykey to reinput ! ---",12);
      IMODEL="NOINPUT";
      getch();
      setfillstyle(1,0);
      bar(10,222,222,234);
      }
     }
     strcpy(SER,IMODEL);
     strcpy(IMODEL,"NOINPUT");
     printf("MODEL=%s\n",MODEL);
     printf("TAG=%s\n",TAG);
     printf("SER=%s\n",SER);
     BBO=GetInitKey("mbtool.ini","BBO",MODEL);    /*ini文件读取函数 GetInitKey("文件名","字段名","KEY名") */
     DCODE=GetInitKey("mbtool.ini","DCODE",MODEL);

     printf("BLNO=%s\n",BLNO);
     printf("DCODE=%s\n",DCODE);
    getch();
  /*SayGoodbye(); */
}



MBTOOL.INI内容

[ROMINFO5]
TTN-111C
TTN-119CP
[BB0]
TTN-112C=KODO-121212
TTN-119CP=KODO-111189
VGN-111C=KODO-123123
[DCODE]
TTN-119CP=DE1234D00

程序见上：
怪事是输入MODEL时是正确的，但输入TAG时MODEL就变了，具体见照片吧，请各位大侠们帮忙分析下哪出错了，谢谢了！

[ 本帖最后由 rangelee 于 2009-9-26 15:14 编辑 ]

如果需要我将INPUT函数贴出来的说下（实在不清楚问题出在哪了）

你好！谢谢你的回复，你的意思是说strcpy函数只能用与字符串常量的拷贝？我也是接触C没多长时间，一直是边学边用，对指针这块一直很朦胧。导致对付字符串变量处理一直搞不好，郁闷中。。。。有没有关于这方面好的教材推荐下，我用的是WIN-TC这个软件，一直是看那里面自带的帮助文件在学习！

[ 本帖最后由 rangelee 于 2009-9-27 11:49 编辑 ]