VB编程问题
我毕业设计要用CST软件设计仿真一个天线,在建模的时候遇到一个问题,要对一个曲面建构进行建模,这个曲面遵循一个指数函数y=e 0.0279z (其中0.0279z是指数),该软件建模曲面要用vb编程,它可直接生成一个自定义曲线,然后改写它的程序,就可以生成自己想要的曲线,下面是它的原程序,请问该怎么编程才能生成我想要的y=e 0.0279z (其中0.0279z是指数)?On Error GoTo Curve_Exists
Curve.NewCurve "2D-Analytical"
Curve_Exists:
On Error GoTo 0
Dim sCurveName As String
sCurveName = "spline_1"
With Spline
.Reset
.Name sCurveName
.Curve "2D-Analytical"
' ======================================
' !!! Do not change ABOVE this line !!!
' ======================================
' -----------------------------------------------------------
' adjust x-range as for-loop parameters (xmin,max,stepsize)
' enter y-Function-statement within for-loop
' fixed parameters a,b,c have to be declared via Dim-Statement
' -----------------------------------------------------------
' NOTE: available MWS-Parameters can be used without
' declaration at any place (loop-dimensions, ...)
' (for parametric curves during parameter-sweeps and optimisation !)
' -------------------------------------------
Dim xxx As Double, yyy As Double
Dim aaa As Double ' not necessary if aaa is model parameter
aaa = 1.23456/Atn(0.5)
For xxx = 1.5 To 10 STEP 0.5
yyy = 3*aaa/xxx + Sin(xxx^2)
.LineTo xxx , yyy
Next xxx
' ======================================
' !!! Do not change BELOW this line !!!
' ======================================
.Create
End With
SelectTreeItem("Curves\2D-Analytical\"+sCurveName)