| 网站首页 | 业界新闻 | 小组 | 威客 | 人才 | 下载频道 | 博客 | 代码贴 | 在线编程 | 编程论坛
欢迎加入我们,一同切磋技术
用户名:   
 
密 码:  
共有 3187 人关注过本帖
标题:问个关于头文件的问题
只看楼主 加入收藏
遗矢的老人
Rank: 9Rank: 9Rank: 9
来 自:成都
等 级:蜘蛛侠
威 望:7
帖 子:325
专家分:1131
注 册:2012-7-20
收藏
得分:9 
牛人啊,一个二个都在搞内库了啊!不过window的话闭源的,一般情况找不到内核源码?就算有也只是一小部分。如果真的想搞内核,linux开源的,不妨试试,不过里面的牛人写的代码都很精简,C语言不到一定程度还是不好搞懂啊!!!
2012-09-16 21:51
遗矢的老人
Rank: 9Rank: 9Rank: 9
来 自:成都
等 级:蜘蛛侠
威 望:7
帖 子:325
专家分:1131
注 册:2012-7-20
收藏
得分:0 
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>

#include <asm/uaccess.h>

#include "sfp-util.h"
#include <math-emu/soft-fp.h>
#include <math-emu/single.h>
#include <math-emu/double.h>

#define    OPC_PAL        0x00
#define OPC_INTA    0x10
#define OPC_INTL    0x11
#define OPC_INTS    0x12
#define OPC_INTM    0x13
#define OPC_FLTC    0x14
#define OPC_FLTV    0x15
#define OPC_FLTI    0x16
#define OPC_FLTL    0x17
#define OPC_MISC    0x18
#define    OPC_JSR        0x1a

#define FOP_SRC_S    0
#define FOP_SRC_T    2
#define FOP_SRC_Q    3

#define FOP_FNC_ADDx    0
#define FOP_FNC_CVTQL    0
#define FOP_FNC_SUBx    1
#define FOP_FNC_MULx    2
#define FOP_FNC_DIVx    3
#define FOP_FNC_CMPxUN    4
#define FOP_FNC_CMPxEQ    5
#define FOP_FNC_CMPxLT    6
#define FOP_FNC_CMPxLE    7
#define FOP_FNC_SQRTx    11
#define FOP_FNC_CVTxS    12
#define FOP_FNC_CVTxT    14
#define FOP_FNC_CVTxQ    15

#define MISC_TRAPB    0x0000
#define MISC_EXCB    0x0400

extern unsigned long alpha_read_fp_reg (unsigned long reg);
extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);


#ifdef MODULE

MODULE_DESCRIPTION("FP Software completion module");

extern long (*alpha_fp_emul_imprecise)(struct pt_regs *, unsigned long);
extern long (*alpha_fp_emul) (unsigned long pc);

static long (*save_emul_imprecise)(struct pt_regs *, unsigned long);
static long (*save_emul) (unsigned long pc);

long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
long do_alpha_fp_emul(unsigned long);

int init_module(void)
{
    save_emul_imprecise = alpha_fp_emul_imprecise;
    save_emul = alpha_fp_emul;
    alpha_fp_emul_imprecise = do_alpha_fp_emul_imprecise;
    alpha_fp_emul = do_alpha_fp_emul;
    return 0;
}

void cleanup_module(void)
{
    alpha_fp_emul_imprecise = save_emul_imprecise;
    alpha_fp_emul = save_emul;
}

#undef  alpha_fp_emul_imprecise
#define alpha_fp_emul_imprecise        do_alpha_fp_emul_imprecise
#undef  alpha_fp_emul
#define alpha_fp_emul            do_alpha_fp_emul

#endif /* MODULE */


/*
 * Emulate the floating point instruction at address PC.  Returns -1 if the
 * instruction to be emulated is illegal (such as with the opDEC trap), else
 * the SI_CODE for a SIGFPE signal, else 0 if everything's ok.
 *
 * Notice that the kernel does not and cannot use FP regs.  This is good
 * because it means that instead of saving/restoring all fp regs, we simply
 * stick the result of the operation into the appropriate register.
 */
long
alpha_fp_emul (unsigned long pc)
{
    FP_DECL_EX;
    FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
    FP_DECL_D(DA); FP_DECL_D(DB); FP_DECL_D(DR);

    unsigned long fa, fb, fc, func, mode, src;
    unsigned long res, va, vb, vc, swcr, fpcr;
    __u32 insn;
    long si_code;

    get_user(insn, (__u32 __user *)pc);
    fc     = (insn >>  0) & 0x1f;    /* destination register */
    fb     = (insn >> 16) & 0x1f;
    fa     = (insn >> 21) & 0x1f;
    func   = (insn >>  5) & 0xf;
    src    = (insn >>  9) & 0x3;
    mode   = (insn >> 11) & 0x3;
   
    fpcr = rdfpcr();
    swcr = swcr_update_status(current_thread_info()->ieee_state, fpcr);

    if (mode == 3) {
        /* Dynamic -- get rounding mode from fpcr.  */
        mode = (fpcr >> FPCR_DYN_SHIFT) & 3;
    }

    switch (src) {
    case FOP_SRC_S:
        va = alpha_read_fp_reg_s(fa);
        vb = alpha_read_fp_reg_s(fb);
        
        FP_UNPACK_SP(SA, &va);
        FP_UNPACK_SP(SB, &vb);

        switch (func) {
        case FOP_FNC_SUBx:
            FP_SUB_S(SR, SA, SB);
            goto pack_s;

        case FOP_FNC_ADDx:
            FP_ADD_S(SR, SA, SB);
            goto pack_s;

        case FOP_FNC_MULx:
            FP_MUL_S(SR, SA, SB);
            goto pack_s;

        case FOP_FNC_DIVx:
            FP_DIV_S(SR, SA, SB);
            goto pack_s;

        case FOP_FNC_SQRTx:
            FP_SQRT_S(SR, SB);
            goto pack_s;
        }
        goto bad_insn;

    case FOP_SRC_T:
        va = alpha_read_fp_reg(fa);
        vb = alpha_read_fp_reg(fb);

        if ((func & ~3) == FOP_FNC_CMPxUN) {
            FP_UNPACK_RAW_DP(DA, &va);
            FP_UNPACK_RAW_DP(DB, &vb);
            if (!DA_e && !_FP_FRAC_ZEROP_1(DA)) {
                FP_SET_EXCEPTION(FP_EX_DENORM);
                if (FP_DENORM_ZERO)
                    _FP_FRAC_SET_1(DA, _FP_ZEROFRAC_1);
            }
            if (!DB_e && !_FP_FRAC_ZEROP_1(DB)) {
                FP_SET_EXCEPTION(FP_EX_DENORM);
                if (FP_DENORM_ZERO)
                    _FP_FRAC_SET_1(DB, _FP_ZEROFRAC_1);
            }
            FP_CMP_D(res, DA, DB, 3);
            vc = 0x4000000000000000UL;
            /* CMPTEQ, CMPTUN don't trap on QNaN,
               while CMPTLT and CMPTLE do */
            if (res == 3
                && ((func & 3) >= 2
                || FP_ISSIGNAN_D(DA)
                || FP_ISSIGNAN_D(DB))) {
                FP_SET_EXCEPTION(FP_EX_INVALID);
            }
            switch (func) {
            case FOP_FNC_CMPxUN: if (res != 3) vc = 0; break;
            case FOP_FNC_CMPxEQ: if (res) vc = 0; break;
            case FOP_FNC_CMPxLT: if (res != -1) vc = 0; break;
            case FOP_FNC_CMPxLE: if ((long)res > 0) vc = 0; break;
            }
            goto done_d;
        }

        FP_UNPACK_DP(DA, &va);
        FP_UNPACK_DP(DB, &vb);

        switch (func) {
        case FOP_FNC_SUBx:
            FP_SUB_D(DR, DA, DB);
            goto pack_d;

        case FOP_FNC_ADDx:
            FP_ADD_D(DR, DA, DB);
            goto pack_d;

        case FOP_FNC_MULx:
            FP_MUL_D(DR, DA, DB);
            goto pack_d;

        case FOP_FNC_DIVx:
            FP_DIV_D(DR, DA, DB);
            goto pack_d;

        case FOP_FNC_SQRTx:
            FP_SQRT_D(DR, DB);
            goto pack_d;

        case FOP_FNC_CVTxS:
            /* It is irritating that DEC encoded CVTST with
               SRC == T_floating.  It is also interesting that
               the bit used to tell the two apart is /U... */
            if (insn & 0x2000) {
                FP_CONV(S,D,1,1,SR,DB);
                goto pack_s;
            } else {
                vb = alpha_read_fp_reg_s(fb);
                FP_UNPACK_SP(SB, &vb);
                DR_c = DB_c;
                DR_s = DB_s;
                DR_e = DB_e + (1024 - 128);
                DR_f = SB_f << (52 - 23);
                goto pack_d;
            }

        case FOP_FNC_CVTxQ:
            if (DB_c == FP_CLS_NAN
                && (_FP_FRAC_HIGH_RAW_D(DB) & _FP_QNANBIT_D)) {
              /* AAHB Table B-2 says QNaN should not trigger INV */
                vc = 0;
            } else
                FP_TO_INT_ROUND_D(vc, DB, 64, 2);
            goto done_d;
        }
        goto bad_insn;

    case FOP_SRC_Q:
        vb = alpha_read_fp_reg(fb);

        switch (func) {
        case FOP_FNC_CVTQL:
            /* Notice: We can get here only due to an integer
               overflow.  Such overflows are reported as invalid
               ops.  We return the result the hw would have
               computed.  */
            vc = ((vb & 0xc0000000) << 32 |    /* sign and msb */
                  (vb & 0x3fffffff) << 29);    /* rest of the int */
            FP_SET_EXCEPTION (FP_EX_INVALID);
            goto done_d;

        case FOP_FNC_CVTxS:
            FP_FROM_INT_S(SR, ((long)vb), 64, long);
            goto pack_s;

        case FOP_FNC_CVTxT:
            FP_FROM_INT_D(DR, ((long)vb), 64, long);
            goto pack_d;
        }
        goto bad_insn;
    }
    goto bad_insn;

pack_s:
    FP_PACK_SP(&vc, SR);
    if ((_fex & FP_EX_UNDERFLOW) && (swcr & IEEE_MAP_UMZ))
        vc = 0;
    alpha_write_fp_reg_s(fc, vc);
    goto done;

pack_d:
    FP_PACK_DP(&vc, DR);
    if ((_fex & FP_EX_UNDERFLOW) && (swcr & IEEE_MAP_UMZ))
        vc = 0;
done_d:
    alpha_write_fp_reg(fc, vc);
    goto done;

    /*
     * Take the appropriate action for each possible
     * floating-point result:
     *
     *    - Set the appropriate bits in the FPCR
     *    - If the specified exception is enabled in the FPCR,
     *      return.  The caller (entArith) will dispatch
     *      the appropriate signal to the translated program.
     *
     * In addition, properly track the exception state in software
     * as described in the Alpha Architecture Handbook section 4.7.7.3.
     */
done:
    if (_fex) {
        /* Record exceptions in software control word.  */
        swcr |= (_fex << IEEE_STATUS_TO_EXCSUM_SHIFT);
        current_thread_info()->ieee_state
          |= (_fex << IEEE_STATUS_TO_EXCSUM_SHIFT);

        /* Update hardware control register.  */
        fpcr &= (~FPCR_MASK | FPCR_DYN_MASK);
        fpcr |= ieee_swcr_to_fpcr(swcr);
        wrfpcr(fpcr);

        /* Do we generate a signal?  */
        _fex = _fex & swcr & IEEE_TRAP_ENABLE_MASK;
        si_code = 0;
        if (_fex) {
            if (_fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND;
            if (_fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES;
            if (_fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND;
            if (_fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF;
            if (_fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
            if (_fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
        }

        return si_code;
    }

    /* We used to write the destination register here, but DEC FORTRAN
       requires that the result *always* be written... so we do the write
       immediately after the operations above.  */

    return 0;

bad_insn:
    printk(KERN_ERR "alpha_fp_emul: Invalid FP insn %#x at %#lx\n",
           insn, pc);
    return -1;
}

long
alpha_fp_emul_imprecise (struct pt_regs *regs, unsigned long write_mask)
{
    unsigned long trigger_pc = regs->pc - 4;
    unsigned long insn, opcode, rc, si_code = 0;

    /*
     * Turn off the bits corresponding to registers that are the
     * target of instructions that set bits in the exception
     * summary register.  We have some slack doing this because a
     * register that is the target of a trapping instruction can
     * be written at most once in the trap shadow.
     *
     * Branches, jumps, TRAPBs, EXCBs and calls to PALcode all
     * bound the trap shadow, so we need not look any further than
     * up to the first occurrence of such an instruction.
     */
    while (write_mask) {
        get_user(insn, (__u32 __user *)(trigger_pc));
        opcode = insn >> 26;
        rc = insn & 0x1f;

        switch (opcode) {
              case OPC_PAL:
              case OPC_JSR:
              case 0x30 ... 0x3f:    /* branches */
            goto egress;

              case OPC_MISC:
            switch (insn & 0xffff) {
                  case MISC_TRAPB:
                  case MISC_EXCB:
                goto egress;

                  default:
                break;
            }
            break;

              case OPC_INTA:
              case OPC_INTL:
              case OPC_INTS:
              case OPC_INTM:
            write_mask &= ~(1UL << rc);
            break;

              case OPC_FLTC:
              case OPC_FLTV:
              case OPC_FLTI:
              case OPC_FLTL:
            write_mask &= ~(1UL << (rc + 32));
            break;
        }
        if (!write_mask) {
            /* Re-execute insns in the trap-shadow.  */
            regs->pc = trigger_pc + 4;
            si_code = alpha_fp_emul(trigger_pc);
            goto egress;
        }
        trigger_pc -= 4;
    }

egress:
    return si_code;
}
这是linux-2.6.34.13内核的math.c的一部分,自己随便看看吧
2012-09-16 22:34
遗矢的老人
Rank: 9Rank: 9Rank: 9
来 自:成都
等 级:蜘蛛侠
威 望:7
帖 子:325
专家分:1131
注 册:2012-7-20
收藏
得分:0 
回复 6楼 zklhp
小弟是搞linux C 的,你这个只是函数声明,windows下能找的到函数体吗?谢谢
2012-09-16 22:46
zhangqi_gsts
Rank: 6Rank: 6
来 自:甘肃天水
等 级:侠之大者
威 望:1
帖 子:227
专家分:457
注 册:2011-3-27
收藏
得分:9 
看到的只能是一些宏定义和函数声明吧,具体的函数体是看不到的
2012-09-16 23:32
洪荒一鼎
Rank: 2
等 级:论坛游民
帖 子:34
专家分:46
注 册:2012-6-27
收藏
得分:9 
回复 5楼 zklhp
顶一个!虽然都知道

不知道,不懂,知道,了解,懂,精通
2012-09-17 09:47
快速回复:问个关于头文件的问题
数据加载中...
 
   



关于我们 | 广告合作 | 编程中国 | 清除Cookies | TOP | 手机版

编程中国 版权所有,并保留所有权利。
Powered by Discuz, Processed in 0.018341 second(s), 8 queries.
Copyright©2004-2024, BCCN.NET, All Rights Reserved