一个极其简单的程序如下：
%the input script
prompt={'输入载波频率：','输入被调制的信号频率：','如果信号为正弦信号请输入s,如果是余弦信号请输入c：'};
title=['the input of info about signal'];
line=1;
%def{'200','45'};
input=inputdlg(prompt,title,line)
%%

fs=1000;
temp1=input{1}
fc=str2num(temp1);
N=1000;
n=0:N-1;
t=n/fs;
temp2=input{2}
if(input{3}=='s')
x=sin(2*pi*str2num(temp2)*t);
else
x=cos(2*pi*str2num(temp2)*t);
end
subplot(221)
plot(t,x);
xlabel('t(s)');ylabel('x');
title('Original Signal')
axis([0 0.1 -1 1])
%
nfft=1024;
window=hamming(512);
noverlap=256;
dflag='none';
[pxx,f]=psd(x,nfft,fs,window,noverlap,dflag);
subplot(222)
plot(f,pxx)
xlabel('Frequency(HZ)');
ylabel('Power Spectrum(X)');
title('Original Signal')
grid
%
y=modulate(x,fc,fs,'pm');
subplot(223)
plot(t,y)
xlabel('t(s)');ylabel('y');
axis([0 0.1 -1 1]);
title('Modulated Signal')
%
[pxx,f]=psd(y,nfft,fs,window,noverlap,dflag);
subplot(224)
plot(f,pxx)
xlabel('Frequency(HZ)');
ylabel('Power Spectrum(X)');
title('Modulated Signal')
grid
运行结果为：
??? Index exceeds matrix dimensions.

Error in ==> main at 24
title('Original Signal')

急问各位能人高手，这是怎么回事？？？？？？？？？

多谢！！！

和你gui的那个title冲突了，在写４个坐标轴的第一个title之前，加一句clear title就可以了

楼上，拜托能讲清楚点吗？

%the input script
prompt={'输入载波频率：','输入被调制的信号频率：','如果信号为正弦信号请输入s,如果是余弦信号请输入c：'};
title=['the input of info about signal']; %受到了这个'title'的影响
line=1;
%def{'200','45'};
input=inputdlg(prompt,title,line)
%%

fs=1000;
temp1=input{1}
fc=str2num(temp1);
N=1000;
n=0:N-1;
t=n/fs;
temp2=input{2}
if(input{3}=='s')
x=sin(2*pi*str2num(temp2)*t);
else
x=cos(2*pi*str2num(temp2)*t);
end
subplot(221)
plot(t,x);
xlabel('t(s)');ylabel('x');
clear title;
title('Original Signal')
axis([0 0.1 -1 1])
%
nfft=1024;
window=hamming(512);
noverlap=256;
dflag='none';
[pxx,f]=psd(x,nfft,fs,window,noverlap,dflag);
subplot(222)
plot(f,pxx)
xlabel('Frequency(HZ)');
ylabel('Power Spectrum(X)');
title('Original Signal')
grid
%
y=modulate(x,fc,fs,'pm');
subplot(223)
plot(t,y)
xlabel('t(s)');ylabel('y');
axis([0 0.1 -1 1]);
title('Modulated Signal')
%
[pxx,f]=psd(y,nfft,fs,window,noverlap,dflag);
subplot(224)
plot(f,pxx)
xlabel('Frequency(HZ)');
ylabel('Power Spectrum(X)');
title('Modulated Signal')
grid

[此贴子已经被作者于2006-7-5 0:31:27编辑过]