注册 登录
编程论坛 C语言论坛

C语言常见编译错误及分析大全

自学的数学 发布于 2018-04-21 20:45, 8140 次点击
1、fatal error C1003: error count exceeds number; stopping compilation
  中文对照:(编译错误)错误太多,停止编译
  分析:修改之前的错误,再次编译
2、fatal error C1004: unexpected end of file found
  中文对照:(编译错误)文件未结束
  分析:一个函数或者一个结构定义缺少“}”、或者在一个函数调用或表达式中括号没有配对出现、或者注释符“/*…*/”不完整等
3、fatal error C1083: Cannot open include file: 'xxx': No such file or directory
  中文对照:(编译错误)无法打开头文件xxx:没有这个文件或路径
  分析:头文件不存在、或者头文件拼写错误、或者文件为只读
4、fatal error C1903: unable to recover from previous error(s); stopping compilation
  中文对照:(编译错误)无法从之前的错误中恢复,停止编译
  分析:引起错误的原因很多,建议先修改之前的错误
5、error C2001: newline in constant
  中文对照:(编译错误)常量中创建新行
  分析:字符串常量多行书写
6、error C2006: #include expected a filename, found 'identifier'
  中文对照:(编译错误)#include命令中需要文件名
  分析:一般是头文件未用一对双引号或尖括号括起来,例如“#include stdio.h”
7、error C2007: #define syntax
  中文对照:(编译错误)#define语法错误
  分析:例如“#define”后缺少宏名,例如“#define”
8、error C2008: 'xxx' : unexpected in macro definition
  中文对照:(编译错误)宏定义时出现了意外的xxx
  分析:宏定义时宏名与替换串之间应有空格,例如“#define TRUE"1"”
9、error C2009: reuse of macro formal 'identifier'
  中文对照:(编译错误)带参宏的形式参数重复使用
  分析:宏定义如有参数不能重名,例如“#define s(a,a) (a*a)”中参数a重复
10、error C2010: 'character' : unexpected in macro formal parameter list
  中文对照:(编译错误)带参宏的形式参数表中出现未知字符
  分析:例如“#define s(r|) r*r”中参数多了一个字符‘|’
11、error C2014: preprocessor command must start as first nonwhite space
  中文对照:(编译错误)预处理命令前面只允许空格
  分析:每一条预处理命令都应独占一行,不应出现其他非空格字符
12、error C2015: too many characters in constant
  中文对照:(编译错误)常量中包含多个字符
  分析:字符型常量的单引号中只能有一个字符,或是以“\”开始的一个转义字符,例如“char error = 'error';”
13、error C2017: illegal escape sequence
  中文对照:(编译错误)转义字符非法
  分析:一般是转义字符位于 ' ' 或 " " 之外,例如“char error = ' '\n;”
14、error C2018: unknown character '0xhh'
  中文对照:(编译错误)未知的字符0xhh
  分析:一般是输入了中文标点符号,例如“char error = 'E';”中“;”为中文标点符号
15、error C2019: expected preprocessor directive, found 'character'
  中文对照:(编译错误)期待预处理命令,但有无效字符
  分析:一般是预处理命令的#号后误输入其他无效字符,例如“#!define TRUE 1”
16、error C2021: expected exponent value, not 'character'
  中文对照:(编译错误)期待指数值,不能是字符
  分析:一般是浮点数的指数表示形式有误,例如123.456E
17、error C2039: 'identifier1' : is not a member of 'identifier2'
  中文对照:(编译错误)标识符1不是标识符2的成员
  分析:程序错误地调用或引用结构体、共用体、类的成员
18、error C2041: illegal digit 'x' for base 'n'
  中文对照:(编译错误)对于n进制来说数字x非法
  分析:一般是八进制或十六进制数表示错误,例如“int i = 081;”语句中数字‘8’不是八进制的基数
19、error C2048: more than one default
  中文对照:(编译错误)default语句多于一个
  分析:switch语句中只能有一个default,删去多余的default
20、error C2050: switch expression not integral
  中文对照:(编译错误)switch表达式不是整型的
  分析:switch表达式必须是整型(或字符型),例如“switch ("a")”中表达式为字符串,这是非法的
21、error C2051: case expression not constant
  中文对照:(编译错误)case表达式不是常量
  分析:case表达式应为常量表达式,例如“case "a"”中“"a"”为字符串,这是非法的
22、error C2052: 'type' : illegal type for case expression
  中文对照:(编译错误)case表达式类型非法
  分析:case表达式必须是一个整型常量(包括字符型)
23、error C2057: expected constant expression
  中文对照:(编译错误)期待常量表达式
  分析:一般是定义数组时数组长度为变量,例如“int n=10; int a[n];”中n为变量,这是非法的
24、error C2058: constant expression is not integral
  中文对照:(编译错误)常量表达式不是整数
  分析:一般是定义数组时数组长度不是整型常量
25、error C2059: syntax error : 'xxx'
  中文对照:(编译错误)‘xxx’语法错误
  分析:引起错误的原因很多,可能多加或少加了符号xxx
26、error C2064: term does not evaluate to a function
  中文对照:(编译错误)无法识别函数语言
  分析:1、函数参数有误,表达式可能不正确,例如“sqrt(s(s-a)(s-b)(s-c));”中表达式不正确 2、变量与函数重名或该标识符不是函数,例如“int i,j; j=i();”中i不是函数
27、error C2065: 'xxx' : undeclared identifier
  中文对照:(编译错误)未定义的标识符xxx
  分析:1、如果xxx为cout、cin、scanf、printf、sqrt等,则程序中包含头文件有误 2、未定义变量、数组、函数原型等,注意拼写错误或区分大小写。
28、error C2078: too many initializers
  中文对照:(编译错误)初始值过多
  分析:一般是数组初始化时初始值的个数大于数组长度,例如“int b[2]={1,2,3};”
29、error C2082: redefinition of formal parameter 'xxx'
  中文对照:(编译错误)重复定义形式参数xxx
  分析:函数首部中的形式参数不能在函数体中再次被定义
30、error C2084: function 'xxx' already has a body
  中文对照:(编译错误)已定义函数xxx
  分析:在VC++早期版本中函数不能重名,6.0版本中支持函数的重载,函数名可以相同但参数不一样
31、error C2086: 'xxx' : redefinition
  中文对照:(编译错误)标识符xxx重定义
  分析:变量名、数组名重名
32、error C2087: '' : missing subscript
  中文对照:(编译错误)下标未知
  分析:一般是定义二维数组时未指定第二维的长度,例如“int a[3][];”
33、error C2100: illegal indirection
  中文对照:(编译错误)非法的间接访问运算符“*”
  分析:对非指针变量使用“*”运算
34、error C2105: 'operator' needs l-value
  中文对照:(编译错误)操作符需要左值
  分析:例如“(a+b)++;”语句,“++”运算符无效
35、error C2106: 'operator': left operand must be l-value
  中文对照:(编译错误)操作符的左操作数必须是左值 分析:
  例如“a+b=1;”语句,“=”运算符左值必须为变量,不能是表达式
36、error C2110: cannot add two pointers
  中文对照:(编译错误)两个指针量不能相加
  分析:例如“int *pa,*pb,*a; a = pa + pb;”中两个指针变量不能进行“+”运算
37、error C2117: 'xxx' : array bounds overflow
  中文对照:(编译错误)数组xxx边界溢出
  分析:一般是字符数组初始化时字符串长度大于字符数组长度,例如“char str[4] = "abcd";”
38、error C2118: negative subscript or subscript is too large
  中文对照:(编译错误)下标为负或下标太大
  分析:一般是定义数组或引用数组元素时下标不正确 error C2124: divide or mod by zero 中文对照:(编译错误)被零除或对0求余 分析:例如“int i = 1 / 0;”除数为0
39、error C2133: 'xxx' : unknown size
  中文对照:(编译错误)数组xxx长度未知
  分析:一般是定义数组时未初始化也未指定数组长度,例如“int a[];”
40、error C2137: empty character constant。
  中文对照:(编译错误)字符型常量为空
  分析:一对单引号“''”中不能没有任何字符
41、error C2143: syntax error : missing 'token1' before 'token2'
42、error C2146: syntax 4error : missing 'token1' before identifier 'identifier'
  中文对照:(编译错误)在标识符或语言符号2前漏写语言符号1
  分析:可能缺少“{”、“)”或“;”等语言符号
43、error C2144: syntax error : missing ')' before type 'xxx'
  中文对照:(编译错误)在xxx类型前缺少‘)’
  分析:一般是函数调用时定义了实参的类型
44、error C2181: illegal else without matching if
  中文对照:(编译错误)非法的没有与if相匹配的else
  分析:可能多加了“;”或复合语句没有使用“{}”
45、error C2196: case value '0' already used
  中文对照:(编译错误)case值0已使用
  分析:case后常量表达式的值不能重复出现
46、error C2296: '%' : illegal, left operand has type 'float'
47 error C2297: '%' : illegal, right operand has type 'float'
  中文对照:(编译错误)%运算的左(右)操作数类型为float,这是非法的
  分析:求余运算的对象必须均为int类型,应正确定义变量类型或使用强制类型转换
48、error C2371: 'xxx' : redefinition; different basic types
  中文对照:(编译错误)标识符xxx重定义;基类型不同
  分析:定义变量、数组等时重名
49、error C2440: '=' : cannot convert from 'char [2]' to 'char'
  中文对照:(编译错误)赋值运算,无法从字符数组转换为字符
  分析:不能用字符串或字符数组对字符型数据赋值,更一般的情况,类型无法转换
50、error C2447: missing function header (old-style formal list?)
51、error C2448: '' : function-style initializer appears to be a function definition
  中文对照:(编译错误)缺少函数标题(是否是老式的形式表?)
  分析:函数定义不正确,函数首部的“( )”后多了分号或者采用了老式的C语言的形参表
52、error C2450: switch expression of type 'xxx' is illegal
  中文对照:(编译错误)switch表达式为非法的xxx类型
  分析:switch表达式类型应为int或char
53、error C2466: cannot allocate an array of constant size 0
  中文对照:(编译错误)不能分配长度为0的数组
  分析:一般是定义数组时数组长度为0
54、error C2601: 'xxx' : local function definitions are illegal
  中文对照:(编译错误)函数xxx定义非法
  分析:一般是在一个函数的函数体中定义另一个函数
55、error C2632: 'type1' followed by 'type2' is illegal
  中文对照:(编译错误)类型1后紧接着类型2,这是非法的
  分析:例如“int float i;”语句
56、error C2660: 'xxx' : function does not take n parameters
  中文对照:(编译错误)函数xxx不能带n个参数
  分析:调用函数时实参个数不对,例如“sin(x,y);”
57、error C2664: 'xxx' : cannot convert parameter n from 'type1' to 'type2'
  中文对照:(编译错误)函数xxx不能将第n个参数从类型1转换为类型2
  分析:一般是函数调用时实参与形参类型不一致
58、error C2676: binary '<<' : 'class istream_withassign' does not define this operator or a conversion to a type acceptable to the predefined operator error C2676: binary '>>' : 'class ostream_withassign' does not define this operator or a conversion to a type acceptable to the predefined operator
  分析:“>>”、“<<”运算符使用错误,例如“cin<>y;”
59、error C4716: 'xxx' : must return a value
  中文对照:(编译错误)函数xxx必须返回一个值
  分析:仅当函数类型为void时,才能使用没有返回值的返回命令。
60、fatal error LNK1104: cannot open file "Debug/Cpp1.exe"
  中文对照:(链接错误)无法打开文件Debug/Cpp1.exe
  分析:重新编译链接
61、fatal error LNK1168: cannot open Debug/Cpp1.exe for writing
  中文对照:(链接错误)不能打开Debug/Cpp1.exe文件,以改写内容。
  分析:一般是Cpp1.exe还在运行,未关闭
62、fatal error LNK1169: one or more multiply defined symbols found
  中文对照:(链接错误)出现一个或更多的多重定义符号。
  分析:一般与error LNK2005一同出现
63、error LNK2001: unresolved external symbol _main
  中文对照:(链接错误)未处理的外部标识main
  分析:一般是main拼写错误,例如“void mian()”
64、error LNK2005: _main already defined in Cpp1.obj
  中文对照:(链接错误)main函数已经在Cpp1.obj文件中定义
  分析:未关闭上一程序的工作空间,导致出现多个main函数
65、warning C4003: not enough actual parameters for macro 'xxx'
  中文对照:(编译警告)宏xxx没有足够的实参
  分析:一般是带参宏展开时未传入参数
66、warning C4067: unexpected tokens following preprocessor directive - expected a newline
  中文对照:(编译警告)预处理命令后出现意外的符号 - 期待新行
  分析:“#include;”命令后的“;”为多余的字符
67、warning C4091: '' : ignored on left of 'type' when no variable is declared
  中文对照:(编译警告)当没有声明变量时忽略类型说明
  分析:语句“int ;”未定义任何变量,不影响程序执行
68、warning C4101: 'xxx' : unreferenced local variable
  中文对照:(编译警告)变量xxx定义了但未使用
  分析:可去掉该变量的定义,不影响程序执行
69、warning C4244: '=' : conversion from 'type1' to 'type2', possible loss of data
  中文对照:(编译警告)赋值运算,从数据类型1转换为数据类型2,可能丢失数据
  分析:需正确定义变量类型,数据类型1为float或double、数据类型2为int时,结果有可能不正确,数据类型1为double、数据类型2为float时,不影响程序结果,可忽略该警告
70、warning C4305: 'initializing' : truncation from 'const double' to 'float'
  中文对照:(编译警告)初始化,截取双精度常量为float类型
  分析:出现在对float类型变量赋值时,一般不影响最终结果
71、warning C4390: ';' : empty controlled statement found; is this the intent?
  中文对照:(编译警告)‘;’控制语句为空语句,是程序的意图吗?
  分析:if语句的分支或循环控制语句的循环体为空语句,一般是多加了“;”
72、warning C4508: 'xxx' : function should return a value; 'void' return type assumed
  中文对照:(编译警告)函数xxx应有返回值,假定返回类型为void
  分析:一般是未定义main函数的类型为void,不影响程序执行 c语言的错误对照表———— 在遇到错误时可以对照查看
73、warning C4552: 'operator' : operator has no effect; expected operator with side-effect
  中文对照:(编译警告)运算符无效果;期待副作用的操作符
  分析:例如“i+j;”语句,“+”运算无意义
74、warning C4553: '==' : operator has no effect; did you intend '='?
  中文对照:(编译警告)“==”运算符无效;是否为“=”?
  分析:例如 “i==j;” 语句,“==”运算无意义
75、warning C4700: local variable 'xxx' used without having been initialized
  中文对照:(编译警告)变量xxx在使用前未初始化
  分析:变量未赋值,结果有可能不正确,如果变量通过scanf函数赋值,则有可能漏写“&”运算符,或变量通过cin赋值,语句有误
76、warning C4715: 'xxx' : not all control paths return a value
  中文对照:(编译警告)函数xxx不是所有的控制路径都有返回值
  分析:一般是在函数的if语句中包含return语句,当if语句的条件不成立时没有返回值
77、warning C4723: potential divide by 0
  中文对照:(编译警告)有可能被0除
  分析:表达式值为0时不能作为除数
78、warning C4804: '<' : unsafe use of type 'bool' in operation
  中文对照:(编译警告)‘<’:不安全的布尔类型的使用
  分析:例如关系表达式“0<=x<10”有可能引起逻辑错误
14 回复
#2
ab14122018-04-22 08:00
mark了
#3
波斯尼亚2018-04-24 10:46
很好,实用
#4
hc662018-07-15 14:18
谢了
#5
kfyniriu2018-07-15 21:05
#6
MeandC2018-07-16 09:15
nice
#7
夏影2018-08-21 15:25
回复 楼主 自学的数学
非常感谢
#8
codeooo2018-08-21 22:05
!!!!!!!!!!没想到真有人编出来
#9
NTNate2018-08-24 01:53
回复 楼主 自学的数学
get 感谢
#10
自学的数学2018-08-24 13:03
详细内容可以参阅:
https://bbs.bccn.net/thread-487734-1-1.html
不过,这里的内容不全。但是很详细。
#11
lxk17329422018-09-04 22:55
回复 楼主 自学的数学
大佬,给个编程软件呗,小白
#12
will丶2018-09-05 19:30
哇,很良心,虽然我每次遇到陌生的都是直接谷歌搜
#13
firecity2018-09-09 10:37
谢谢分享,对小白很有帮助
#14
初学者lx2018-09-17 12:56
感谢楼主!
#15
初学者lx2018-09-24 09:56
感谢楼主
1